feat(WP-0016/C2-C3): close build infrastructure workplan

C2: document actual GHC cache behavior (-fbyte-code, no .o files, .hi
caching via -fwrite-interface) and correct CLAUDE.md cache claim.
C3: create IHUB-WP-0017 error-fix loop workplan (ralph-compatible,
5 tasks E1-E5, runs inside devenv shell).
WP-0016 status → done.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

CLAUDE.md

@@ -79,11 +79,7 @@ scripts/compile-check --bg     # same, background-friendly (no colour/title)
 scripts/compile-check-core     # Layer 1+2 only — verify clean base before touching Layer 3
 ```
 
-**GHC object cache**: compiled `.o`/`.hi` files persist in `.devenv/` between restarts. After the first full build (20–60 min on constrained hardware), subsequent single-module rebuilds take 5–30 seconds. Cache location:
+**GHC compilation mode**: IHP uses `-fbyte-code` — GHCi compiles modules to bytecode in memory, not to persistent `.o` files. The `-fwrite-interface` flag writes `.hi` type-info files alongside source modules; these survive session restarts and skip re-type-checking of unchanged modules. Each ghcid restart regenerates bytecode for the full module graph. Expect 20–60 min on first build; restarts are somewhat faster due to `.hi` caching but not dramatically so. `.hi` files are written next to their source files (e.g. `Web/Controller/Sessions.hi`).
-
-```bash
-find /home/tegwick/inter-hub -name "*.hi" 2>/dev/null | head -5
-```
 
 **Error-fix discipline**: fix bottom-up (Layer 1 → 4). Fix one module at a time; wait for ghcid to reload before moving on. See `workplans/IHUB-WP-0016-build-infrastructure-and-error-loop.md` for the full SOP.
 

workplans/IHUB-WP-0016-build-infrastructure-and-error-loop.md

@@ -4,7 +4,7 @@ type: workplan
 title: "Build Infrastructure: Incremental Compilation and Autonomous Error-Fix Loop"
 domain: inter_hub
 repo: inter-hub
-status: open
+status: done
 owner: custodian
 topic_slug: inter_hub
 created: "2026-04-10"
@@ -71,6 +71,12 @@ skips the database startup, port binding, and service orchestration overhead.
 
 ### C1 — Create `scripts/compile-check` script ✓
 
+```task
+id: C1
+status: done
+priority: high
+```
+
 Also created `scripts/compile-check-core` and `.ghci-core` to compile Layer 1+2
 in isolation (no Main.hs, no Layer 3). Resolves the architecture gap where Layer
 2 correctness could not be verified independently.
@@ -103,19 +109,40 @@ This relies on `.ghci` (already present) which sets up `-j1` and loads the IHP c
 
 ### C2 — Verify GHC object cache persistence
 
-GHC stores compiled objects in IHP's `.devenv` or a project-local `dist-newstyle/`
+```task
-equivalent. Verify the cache survives between `devenv up` restarts:
+id: C2
-
+status: done
-```bash
+priority: medium
-# After first successful build, check cache location:
-find /home/tegwick/inter-hub -name "*.o" -newer Main.hs 2>/dev/null | head -5
 ```
 
-If the cache is cleared on each `devenv up` restart, add `IHP_BUILD_CACHE` or
+**Finding (2026-04-10):** IHP's `applicationGhciConfig` sets `-fbyte-code`. GHCi compiles
-configure the Nix build dir to persist. Document the location here.
+modules to bytecode in memory — there are **no persistent `.o` object files**. Each ghcid
+session recompiles all bytecode from source.
+
+Our `-fwrite-interface` flag (C4) writes `.hi` interface files alongside source modules.
+These survive session restarts and allow GHCi to skip re-type-checking unchanged modules.
+This saves some time on restarts but does NOT eliminate full bytecode recompilation.
+
+**Net result:** No persistent `.o` cache. `.hi` files provide partial speedup (skip
+type-checking). A single-module change still triggers full bytecode regeneration of that
+module and its dependents. For true persistent incremental builds, `-fobject-code` would
+be needed — not worth adding given IHP's design tradeoffs.
+
+**Action:** No configuration change needed. Expectation documented here and in CLAUDE.md.
 
 ### C3 — Autonomous error-fix loop (ralph-workplan)
 
+```task
+id: C3
+status: done
+priority: high
+```
+
+Delivered as `workplans/IHUB-WP-0017-error-fix-loop.md`. Run inside `devenv shell`:
+```bash
+/ralph-workplan workplans/IHUB-WP-0017-error-fix-loop.md
+```
+
 Configure a ralph-workplan loop:
 1. `scripts/compile-check --bg` runs ghcid in background, writing to `/tmp/ihub-compile-errors.txt`
 2. Monitor tool watches the log file for new error output
@@ -130,6 +157,12 @@ Configure a ralph-workplan loop:
 
 ### C4 — Add GHC `-fwrite-interface` and `-keep-going` flags to `.ghci` ✓
 
+```task
+id: C4
+status: done
+priority: high
+```
+
 ```
 -- Continue past errors in other modules (report all errors in one pass)
 :set -fkeep-going
@@ -142,6 +175,12 @@ stopping at the first failure — critical for batch error fixing.
 
 ### C5 — Document module surface constraints in CLAUDE.md ✓
 
+```task
+id: C5
+status: done
+priority: medium
+```
+
 Added "Compilation Layers" section to CLAUDE.md covering:
 - Never modify Layer 1 during error-fix loops (and why — cascade invalidation)
 - Layer breakdown with file counts

workplans/IHUB-WP-0017-error-fix-loop.md

@@ -0,0 +1,120 @@
+---
+id: IHUB-WP-0017
+type: workplan
+title: "Autonomous Error-Fix Loop: Reach Clean Build"
+domain: inter_hub
+repo: inter-hub
+status: active
+owner: custodian
+created: "2026-04-10"
+updated: "2026-04-10"
+depends_on: [IHUB-WP-0016]
+---
+
+# IHUB-WP-0017 — Autonomous Error-Fix Loop: Reach Clean Build
+
+## Goal
+
+Drive the inter-hub codebase to a clean `ghcid` build ("All good, N modules loaded")
+by fixing compilation errors bottom-up, one module at a time.
+
+## Pre-conditions
+
+- Must be run inside `devenv shell` (IHP_LIB must be set, ghcid in PATH)
+- WP-0016 complete (compile-check scripts and ghci flags in place)
+
+## How to start
+
+```bash
+# Enter devenv shell first:
+devenv shell
+
+# Then start this loop:
+/ralph-workplan workplans/IHUB-WP-0017-error-fix-loop.md
+```
+
+## Error-Fix SOP (Standard Operating Procedure)
+
+```
+1. Run: scripts/compile-check --bg
+2. Tail /tmp/ihub-compile-errors.txt
+3. Parse errors: group by module, order by Layer (1 → 4)
+4. Fix Layer 1 errors first (rare; usually type/import issues in Web/Types.hs)
+5. For each failing module in Layer 2–3:
+   a. Read current module state
+   b. Apply targeted fix (one module at a time)
+   c. Wait for ghcid "Reloading..." + result
+   d. If still failing: re-read error, apply next fix
+   e. If 3 attempts fail: escalate — flag_for_human with module name and error
+6. After Layer 3 clean: fix Layer 4 (FrontController/Routes)
+7. "All good (N modules)" in log = build clean
+```
+
+**Layer discipline** (never violate):
+- Never modify Layer 1 (`Web/Types.hs`, `build/Generated/*.hs`) during error-fix loops
+- Layer 1 changes invalidate ALL 59 controllers and 120 views simultaneously
+- Fix within the layer where the error is reported; escalate if the fix requires Layer 1
+
+## Tasks
+
+### E1 — Start compile-check and capture initial error set
+
+```task
+id: E1
+status: todo
+priority: high
+```
+
+Run `scripts/compile-check --bg` and read `/tmp/ihub-compile-errors.txt`. List all
+failing modules and their layers.
+
+### E2 — Fix Layer 2 errors (Application/Helper/*.hs)
+
+```task
+id: E2
+status: todo
+priority: high
+```
+
+Fix all errors in `Application/Helper/*.hs`. Verify via ghcid reload. Mark done when
+Layer 2 shows no errors.
+
+### E3 — Fix Layer 3 errors (Web/Controller/*.hs and Web/View/**/*.hs)
+
+```task
+id: E3
+status: todo
+priority: high
+```
+
+Fix errors in controllers and views. Work module-by-module, bottom-up. Mark done when
+Layer 3 shows no errors.
+
+### E4 — Fix Layer 4 errors (Web/FrontController.hs, Web/Routes.hs)
+
+```task
+id: E4
+status: todo
+priority: medium
+```
+
+Fix wiring errors last. Mark done when `ghcid` reports "All good, N modules loaded".
+
+### E5 — Commit clean build and close WP-0014/A1
+
+```task
+id: E5
+status: todo
+priority: medium
+```
+
+After "All good" state:
+1. Commit all fixes with `fix(WP-0017): reach clean build`
+2. Update `workplans/IHUB-WP-0014-pre-flight-deployment-gaps.md` A1 status to done
+3. Mark this workplan done
+
+## Exit Criteria
+
+- `ghcid` reports "All good, N modules loaded" with no errors
+- All fixes committed
+- WP-0014/A1 closed